Browse all practice questions for the ASA Landing Gear Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

ASA Landing Gear Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What routine checks should pilots perform regarding the landing gear before takeoff?
  • What should be done following the activation of a properly operating fusible plug in a tire?
  • How are braking systems typically integrated with landing gear?
  • What might a red gear indicator light signify?
  • What safety feature prevents the landing gear from being retracted while on the ground?
  • What happens if there is internal leakage in a brake master cylinder unit?
  • Which repair method is suitable for fixing a toe-in condition without component replacement?
  • What are the two main types of landing gear configurations?
  • What is the primary purpose of debooster valves in brake systems?
  • In shock struts, chevron seals are used to achieve which purpose?
  • What should be avoided when the brakes are hot in an aircraft equipped with multiple-disk type brake assemblies?
  • What is involved in the landing gear extension/retraction sequence?
  • What is the primary purpose of an orifice check valve?
  • What might indicate a potential issue with the landing gear during operation?
  • What is a common cause of landing gear alignment issues?
  • What device allows fluid to flow freely in one direction while restricting flow in the opposite direction?
  • What is a common indicator of air in the brake system?
  • What is the role of the landing gear actuating system?
  • How is the stability of landing affected by the landing gear design?
  • What occurs at the steering damper if the flow of high-pressure fluid is interrupted?
  • What does the phrase "failure to extend gear prior to landing" typically imply?
  • Where should a brake actuator be positioned in a hydraulic brake system?
  • What can cause landing gear failure during takeoff or landing?
  • Which type of landing gear is better suited for rough terrain?
  • Which factor contributes to structural fatigue in landing gear?
  • How does the hydraulic system operate in relation to the landing gear?
  • How does the design of landing gear affect overall aircraft performance?
  • What component is crucial for landing gear retraction in a hydraulic system?
  • Which aspect of aircraft brake systems must be maintained to prevent overheating?
  • What action is recommended when there is a disparity of more than 5 pounds of air pressure in dual-mounted tires?
  • What marking indicates that an O-ring is suitable for use with MIL-H-5606 (mineral base) fluid?
  • How do retractable landing gear affect an aircraft's performance?
  • What types of records are crucial for maintaining landing gear systems?
  • Why is regular landing gear inspections important?
  • Why is it recommended to deflate tires on split rim wheels before removal?
  • What is the function of metering pins in oleo shock struts?
  • A hydraulic hose identified as MIL-H-8794 is marked with a yellow stripe. What does this stripe indicate?
  • Which condition is most likely to cause excessive fluctuations of the pressure gauge in a hydraulic system?
  • What is likely to happen if the landing gear is not deployed before landing?
  • What is the role of the landing gear position indicator?
  • Which hydraulic hose specification indicates a hose for high-pressure applications?
  • What is a common material used for manufacturing landing gear components?
  • Which brake type is not adaptable to mechanical operation?
  • What does the term 'bleeding brakes' refer to in brake service work?
  • Where is the position of a brake debooster in a hydraulic brake system?
  • What consequence might improper maintenance of landing gear lead to?
  • What is a significant advantage of tricycle landing gear over conventional gear?
  • If an aircraft shock strut (air/oil type) bottoms upon initial landing contact, but functions correctly during taxi, what is the most probable cause?
  • Which of the following is a potential consequence of not maintaining landing gear?
  • What provision must be present in aircraft with retractable landing gear?
  • What will happen to fusible plugs installed in some aircraft wheels at elevated temperatures?
  • How does landing gear impact aircraft maintenance schedules?
  • What is the function of a hydraulic accumulator during peak demands?
  • When installing a chevron-type seal in an aircraft hydraulic cylinder, which direction should the open side of the seal face?
  • In a hydraulic system, what is the function of a pressure regulator?
  • If an airplane equipped with master cylinders and single-disk brakes has excessive brake pedal travel, but the brakes are hard and effective, what is the probable cause?
  • Why do tire manufacturers recommend inflating and then deflating tubes in new tires?
  • What is the primary function of a sleeve, spacer, or bumper ring in a landing gear oleo shock strut?
  • If the required torque of a trunnion nut is 320 inch-pounds and a 2-inch straight adapter is used on an 18-inch torque wrench, how many foot-pounds will be indicated?
  • What is the purpose of the landing gear control handle?
  • What does "overcenter" mean in landing gear mechanics?
  • What type of filter is identified by incorporating specially treated cellulose paper?
  • Which type of aircraft is likely to use retractable landing gear?
  • What maintenance action is taken when tires show excessive wear?
  • Excessive wear in the shoulder area of an aircraft tire indicates what condition?
  • What is the purpose of a brake debooster valve?
  • What are the key components of tricycle landing gear?
  • What is meant by the term "ground load" in relation to landing gear?
  • What is the purpose of chines on some aircraft nose wheel tires?
  • What impact does hydraulic fluid thickening have on the landing gear?
  • What environmental factor should be closely monitored during landings?
  • What is a critical factor to consider during a landing gear inspection?
  • Which of the following can be an indication of a landing gear malfunction?
  • What is used to prevent a rapid extension of an oleo shock strut after landing impact?
  • What is the purpose of a compensating port or valve in a brake master cylinder of an independent brake system?
  • How is equal pressure on both sides of a Cleveland disk brake's rotating disk assured?
  • What characterizes a hydraulic system referred to as a 'power pack' system?
  • In the event of a landing gear failure, what is a critical first step for pilots?
  • Which maintenance practice is crucial for avoiding hydraulic failures in landing gear?
  • How often should landing gear systems be inspected?
  • What type of landing gear configuration is most common for commercial jets?
  • What is the most probable cause of excessive dragging left brake on an airplane with no recent service work?
  • What is the result of a malfunctioning steering damper during landing?
  • When servicing an air/oil shock strut with MIL-5606, what is the correct procedure?
  • What is a probable cause of excessive travel in brake pedals reported by a pilot?
  • What should pilots do if they experience difficulties during landing due to gear alignment?
  • What type of landing gear offers better performance on rough terrain?
  • What is the purpose of hydraulic fluid in the landing gear system?
  • Which of the following is NOT a part of a typical landing gear assembly?
  • How can wind conditions affect landing gear performance?
  • What is the primary function of the landing gear doors?
  • What role does landing gear play in aircraft design?
  • What is the purpose of the weight on wheels switch in aircraft landing gear systems?
  • What is the primary function of the landing gear in an aircraft?
  • What effect do extreme temperatures have on the landing gear hydraulic system?
  • What is the primary purpose of landing gear in an aircraft?
  • Which device provides visual indicators for the landing gear’s status?
  • Why is it essential to properly stow landing gear doors?
  • What are hydraulic packing seals used for in a landing gear shock strut?
  • Which type of control devices are used when a large volume of fluid is required for aircraft brakes?
  • What are signs of landing gear failure during approach?
  • What procedure should be followed if the landing gear warning light fails?
  • For what purpose are torque links designed in landing gear systems?
  • Where can the correct inflation pressure for an aircraft tire be obtained?
  • What component is essential for the mechanical locking of landing gear?
  • What emergency procedure should be executed for a landing gear malfunction?
  • Overinflated aircraft tires may cause damage to which component?
  • What is a common failure mode for landing gear systems?
  • What action should a pilot take if landing gear fails to indicate it is down and locked?
  • What does the term "gear up landing" refer to?
  • What is the function of a safety pin in landing gear?
  • What is a potential safety issue related to landing gear?
  • What happens when a brake debooster valve fails?
  • Which of the following is a common landing gear malfunction that could impact flight safety?
  • Which system serves as the pressure source for power brakes in aircraft?
  • What is the primary purpose of nose gear centering cams in retractable landing gear systems?
  • If the extended longitudinal axis of the main landing gear wheel assemblies intersects aft of the aircraft, how are the wheels described?
  • Which system is responsible for extending and retracting the landing gear?
  • If a pilot reports that a brake is spongy, what is the most likely cause?
  • Which component is integral to maintaining control during the retraction of landing gear?
  • What operational check can be done to confirm landing gear status?
  • Power boost brake systems are typically used on aircraft that experience what condition?
  • How does weight and balance impact landing gear performance?
  • What is the role of a sequence valve in a hydraulic retractable landing gear system?
  • When bleeding aircraft brakes, which of the following indicates successful purge of the system?
  • What should be done when an empty shock strut is filled with fluid?
  • What is the primary purpose of shock struts in landing gear?
  • What does excessive wear in the center of the tread of an aircraft tire indicate?
  • How does an air/oil type landing gear shock strut cushion the initial shock of landing?
  • What increases the risk of heat buildup in aircraft tires?
  • What are the best safeguards against heat buildup in aircraft tires?
  • A high-speed aircraft tire with a sound cord body and bead may be recapped how many times?
  • Which landing gear configuration is characterized by a nose wheel and two main wheels?
  • How long should you wait after a flight before checking tire pressure?
  • What could cause parking brakes to bleed off pressure apart from an external leak?
  • Why are debooster cylinders used in brake systems?
  • What does "gear down and locked" signify?
  • What could be a consequence of a malfunctioning gear indicator light during landing?
  • What is a common material used for construction of landing gear?
  • What is the purpose of a relief valve in a brake system?
  • Which situation could signify a need for manual gear deployment?
  • Which component in the brake system can cause improper braking if it gets contaminated?
  • Which device in a hydraulic system allows circulation of fluid when there are no demands on the system?
  • Which method is used to correct an out-of-tolerance toe-in condition of main landing gear wheels?
  • What could indicate a need to replace a fusible plug?
  • What can indicate a malfunction in the landing gear system?
  • What should be done immediately before adding fluid to a shock strut?
  • What should be performed after maintenance on an aircraft's landing gear system?
  • Why are hydraulic systems commonly used in landing gear operations?
  • What should pilots check for before takeoff related to landing gear?
  • What type of motor is typically used to raise and lower landing gear?
  • What is the consequence of a broken piston return spring in a brake master cylinder?
  • How can pilot error affect landing gear operations?
  • What is the purpose of emergency gear extension?
  • What component of the landing gear absorbs shock during landing?
  • What is the role of the failsafe mechanism in landing gear?
  • Which component is crucial for detecting the landing gear's deployment status?
  • What is the effect of a restricted compensator port in a brake master cylinder?
  • What safety feature is critical for aircraft equipped with retractable landing gear in case of system failure?
  • What must a pilot check before landing to ensure gear is secure?
  • What is the purpose of the landing gear squat switch?
  • What is considered preventive maintenance regarding landing gear tires?
  • What is a critical instruction regarding the use of hydraulic systems in aircraft?
  • What does the term "cycle count" refer to in landing gear systems?
  • If air in the brake system is not the cause of spongy brake action, what is the next likely cause?
  • Name a common inspection point for landing gear maintenance.
  • A special bolt in a landing gear attachment requires a torque value of 440 inch-pounds. How many foot-pounds does this equate to?
  • What is the primary function of brake components in conjunction with landing gear?
  • Where can the instructions for the fluid type and air pressure in a shock strut be found?
  • What is a potential hazard of using brakes designed for lower pressure with a high-pressure system?
  • A stripe or mark applied to a wheel rim and extending onto the sidewall of a tube-type tire is referred to as what?
  • If a shock strut bottoms after it has been properly serviced, what should be done next?
  • What is the main purpose of wheel chocks?
  • What do lockout deboosters primarily function as?
  • What characteristic is crucial for landing gear on rough terrain?
  • Which component is known to affect the stroke limitation in oleo shock struts?
  • Identify a common type of shock absorber used in landing gear systems.
  • What kind of pressure is essential for the operation of a power boost brake system?
  • Which of the following is considered harmful to aircraft tires?
  • What indicates a high-pressure type on an air valve core stem?
  • What is the function of the torque links on a landing gear oleo strut?
  • Which component is essential for preventing accidental gear retraction during takeoff?
  • In hydraulic systems, what allows for the safe engagement of the emergency landing gear?
  • During landing gear inspection, what should be checked regularly?
  • Which brake system component is primarily affected by deteriorated flexible hoses?
  • What does a gear warning horn indicate during landing?
  • A fully-charged hydraulic accumulator provides what benefit to a hydraulic system?
  • Which type of valve is utilized to isolate the emergency brake system from the normal power brake control valve system?
  • What is measured to determine the proper operating position of an oleo shock strut?
  • What is the function of a cam incorporated in a nose gear shock strut?
  • When does a landing gear position and warning system provide a warning in the cockpit?
  • How often should routine maintenance be performed on landing gear?
  • How can it be determined that all air has been purged from a master cylinder brake system?
  • How do weight on wheels (WOW) systems function?
  • What aspect of landing gear does excessive wear directly affect?
  • What factor is critical for ensuring stable landings regarding landing gear?
  • What is the primary purpose of the landing gear fairing?
  • What does a landing gear retract mechanism typically consist of?
  • What should be checked when a shock strut bottoms during landing?
  • What is the primary purpose of balancing aircraft wheel assemblies?
  • How is the oil level of an air and oil shock strut typically checked?
  • Explain how an oleo strut works.
  • What is an indication that the air has been purged from the aircraft brake system during bleeding?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy